Product Description The screw conveyor series is divided into small, medium, large, extra large and there is no axis-axis, and so on the basis of the transmission characteristics of the material was divided into three categories and fill factor (0.45, 0.33, 0.15 coefficient of this material is based on the proportion of And to the development of Sato’s) and multi-speed option. The transmission medium temperature can be less than 300 ℃ for special materials, such as strong adhesion or winding easy, and so on should be used for non-axis spiral conveyor. The ultra-fine powder of the type of transport should be targeted use of special high-precision spiral. Widely used in building materials, chemicals, electronics, metallurgy, coal, food and environmental protection industries, with the level of delivery methods, tilt, vertical, and so on.
The main features of
Transport a large quantity of good insulation, can be attached to the cooling layer, reducing power consumption.
Start fast, stable, low noise.
Can be installed to facilitate the location and angle adjustment.
Jin, a population can be expected to universal ball, bag, flange connection, and other methods can also be produced by our company and the Butterfly, board, etc. combination valve connection
Small-diameter, high-speed, large transmission capacity. Variable-pitch spiral.
Can be closed for the entire transportation (Seamless type shell) can also open transport (U-shell).
Can discharge into the multi-point, high flexibility.
Stand-alone transport up to 20-25 meters high, the level of transmission combination of up to 100 meters, stand-alone long distance transmission can be used at both ends of power-driven form.
Special ultra-fine powder can spiral vertical transportation of materials to reach more than 1000 heads of 15 meters height.
Specific materials and their corresponding coefficient
Degree blocks material
Material cut-mill
Filling factor
Powder
No abrasion a half of abrasion
0.35-0.45
Powder
Abrasion
0.23-0.33
Small block a <60mm
No abrasion a half of abrasion
0.23-0.33
Small block a <60mm
Abrasion
0.10-0.15
Technical parameters
LS-screw conveyor
Specifications Parameters
LS100
LS120
LS140
LS160
LS200
LS250
LS300
LS400
Screw diameter Ømm
90
115
135
163
185
237
285
362
Screw speed r/min
≤300
≤308
≤260
≤200
≤170
≤170
Spiral shell diameter Ømm
108
133
159
194
219
273
325
402
The largest transmission capacity t/h
7
10
15
25
40
60
90
120
Maximum length of the transmission Lmm
8
10
12
15
18
25
25
25
The installation of point of view a
0°- 60°
Motor
Model
L≤8m
Y90S-4
Y100L1-4
Y100L2-4
Y132S-4
Y132M-4
Y160L-6
Y180M-4
Y180M-4
Power
1.1kw
2.2kw
3 kw
5.5 kw
7.5 kw
11 kw
18.5 kw
18.5 kw
Model
L＞8m
Y100L1-4
Y100L2-4
Y112M-4
Y132M-4
Y160M-4
Y180L-6
Y180L-4
Y180L-4
Power
2.2kw
3 kw
4 kw
7.5kw
11 kw
15 kw
22 kw
22 kw
LU-screw conveyor
Model LU
100
160
200
250
315
400
500
630
800
1000
1250
Screw diameter mm
100
160
200
250
315
400
500
630
800
1000
1250
Pitch mm
100
160
200
250
315
355
400
450
500
560
630
Speed r/min
140
112
100
90
80
71
63
50
40
32
25
Throughput m3/h
2.2
7
13
22
31
62
98
140
200
280
380
Speed r/min
112
90
80
71
63
56
50
40
32
25
20
Throughput m3/h
1.7
6
10
18
24
49
78
112
160
220
306
Speed r/min
90
71
63
56
50
45
40
32
25
20
16
Throughput m3/h
1.4
5
8
14
19
39
62
90
126
176
245
Speed r/min
71
50
50
45
40
36
32
25
20
16
13
Throughput m3/h
1.1
3.1
6.2
11
15.4
31
50
77
102
140
198
LH-screw conveyor
Specifications
LH160
LH200
LH250
LH315
Screw diameter mm
160
200
250
315
Spiral-speed r/min
450
450
415
380
Throughput m3/h
10
28.5
51
95
A high degree of transmission m
2.5-15
Motor
Height m
2.5-5.5
2.5-5.5
2.5-4
2.5-4
Model Power kw
Y100L2-4 3
Y100L2-4 3
Y132M1-6 4
Y160M-6 7.5
Height m
6-7
4.5-5.6
Model Power kw
Y112M-4 4
Y132M2-6 5.5
Y160L-6 11
Height m
7.5-10
6-7.5
6.5-8
Model Power kw
Y132S-4 5.5
Y160L-6 7.5
Y160L-6 15
Height m
10.5-13.5
8-11
8.5-15
Model Power kw
Y132S-4 7.5
Y132M-4 7.5
Y160L-6 11
Y180L-6 11 × 2台
Height m
14-15
11.5-15
12.5-20
Model Power kw
Y160M-4 11
Y180L-6 15×2台
LW-free screw conveyor shaft
Model
U-mm slot width
Throughput m3/h
Transmission distance m
Power kw
Transportation point of view a
LW140
140
2.6
12
1.5-2.2
≤30°
LW180
180
6
13
2.2-3
LW250
250
9
16
3-4
LW325
325
13
18
4-5.5
LW425
425
18
22
5.5-7.5
LW525
525
28
25
7.5-11
LW600
600
42
28
11-15
Note: The above-mentioned increase in the diameter of the screw conveyor under the premise of reducing speed.
