Send boiling pot primer on the way to introduce transport
    The principle is as follows: materials into the confined circularized tank after tank of compressed air sent by the top plate and bottom of the stream of pressurized air into the Department, through the air breathable insulation layer, so that the strong material "boiling" was fluidized. Due to the pressure tank to send the role of the fluidized material lost by the built-in feed tube out. 
     It has a smooth delivery, mixed high and low weight are widely used in the powder of granular material transport, such as powder, cement, coal ash, clay powder, flour, calcium carbonate, limestone powder, broken Doupi powder, rice husk powder . 
     Boiling-pneumatic conveying equipment can be sent tanks at the bottom of the flow of the board structure, texture, the installation location of the design is expected to lose control of the material out of the way. By sending a tank on the location of the material, more or less on the sub-primer-and side-cited. As the tank to send materials of different streams of state expected to lose control will cause instability, transmission capacity, mixing ratio, and other parameters will also change accordingly. According to the experiments show that in the long distance transportation, use of on-cited better. Pipeline a high degree of vertical rise should be maintained at more than 5m, so to speed up the flow of materials from entering the stability of the flow. 
     Cited on the boiling pot-sent, the flow of the board can send the bottom of the tube is expected to lose the lower part of expanding the installation of pipes in the flow of an appropriate location at the top of the board, sent from the top of the tank at the top of the upward vertical, installed on the booster jet The exit of the pipe. A total of compressed air into the Fensan Lu: all the way from the top of the Department tanks sent into the air, so that the top-back to form soon, will push down the material; Road from the main gas source at the bottom of the tank sent into the trachea into the flow Of board, and through cut-off valve regulating air flow; three routes into the trachea into the pressurized jet, Air War, the size of the volume of Air-conditioning can be expected to control than the gas mixture. When the pressure tank to send pre-set value of value, the loser expected to open the valve quickly, the high concentration of gas is expected to lose material into mixed-flow control, a smooth transfer out. 
     Send-side argument boiling pot, the flow of tilt for the board layout, is expected to lose control at the send side cans, the flow of materials along the tilt direction of the board of transportation, which can send in the form of discrete structures and two horizontal, lying -Bulk materials used in the tanker. 
     Can send the main technical parameters, family size and structure of table

Cited on the boiling pot-sent the main technical parameters

Cited on the boiling pot-sent family size